.-.-.-.-.-

#!/usr/bin/perl

##########################################################################
# $Id: smartd 239 2014-09-16 20:14:12Z opoplawski $
##########################################################################

#######################################################
## Copyright (c) 2008 Jaco Botha <jaco_botha@hotmail.com>
## Covered under the included MIT/X-Consortium License:
##    http://www.opensource.org/licenses/mit-license.php
## All modifications and contributions by other persons to
## this script are assumed to have been donated to the
## Logwatch project and thus assume the above copyright
## and licensing terms.  If you want to make contributions
## under your own copyright or a different license this
## must be explicitly stated in the contribution an the
## Logwatch project reserves the right to not accept such
## contributions.  If you have made significant
## contributions to this script and want to claim
## copyright please contact logwatch-devel@lists.sourceforge.net.
#########################################################

use strict;

my ($Device, $Msg, $Test);
my %ParamChanges = ();
my %TempChanges = ();
my %TempLimit = ();
my %TempCritLimit = ();
my %Pendsectors = ();
my %NumPendsectors = ();
my %Offsectors = ();
my %NumOffsectors = ();
my %Warnings = ();
my %UnableToReg = ();
my $ShutdownFailed = 0;
my $StartupFailed = 0;
my %NotInDatabase = ();
my %CantMonitor = ();
my $UnableToMonitor = 0;
my %DriveTest = ();
my %Failed = ();
my %OtherList = ();
my $DLine = 0;
my %UnavailableDev = ();
my %SataDisk = ();
my %CheckFailed = ();
my %Monitoring = ();
my %DeviceInfo = ();

my $Detail = $ENV{'LOGWATCH_DETAIL_LEVEL'} || 0;
my $IgnoreUnmatched = $ENV{'smartd_ignore_unmatched'} || 0;

while (defined(my $ThisLine = <STDIN>)) {
   chomp($ThisLine);
   if ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), No such device(?: or address)?, open failed/ )) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), open failed: No such device(?: or address)?/ )) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), found in smartd database./ )) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), not found in smartd database./ )) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), opened/)) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), appears to lack SMART*/ )) {
       # ignore
   } elsif ( ($Device) = ($ThisLine =~ /^Device: ([^,]+), enabled autosave $cleared GLTSD bit$\./ )) {
       # ignore
   } elsif ( ($Device) = ($ThisLine =~ /^Device: ([^,]+), enabled SMART Attribute Autosave/ )) {
       # ignore
   } elsif ( ($Device) = ($ThisLine =~ /^Device: ([^,]+), enabled SMART Automatic Offline Testing/ )) {
       # ignore
   } elsif ( ($Device) = ($ThisLine =~ /^Device: ([^,]+), Self-Test Log error count increased from \d+ to \d+/ )) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), new Self-Test Log error at hour timestamp \d+/ )) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), same Attribute has different ID numbers:/ )) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^Num *Test_Description *Status *Remaining *LifeTime/ )) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^# *[0-9]+  Short offline *Completed:/ )) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^# *[0-9]+  Extended offline *Completed:/ )) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^# *[0-9]+  Offline *Fatal or unknown error/ )) {
       # ignore
   } elsif ( ($Device) = ($ThisLine =~ /^Device: ([^,]+), not capable of SMART (Health Status |self-)check/ )) {
       # ignore
   } elsif ( ($Device) = ($ThisLine =~ /^Device: ([^,]+), is in STANDBY mode, skipping checks/ )) {
       # ignore
   } elsif ( ($Device) = ($ThisLine =~ /^Device: ([^,]+), self-test in progress, [0-9]+% remaining/ )) {
       # ignore
   } elsif ( ($Device) = ($ThisLine =~ /^Device: ([^,]+), previous self-test completed without error/ )) {
       # ignore
   } elsif ( ($Device) = ($ThisLine =~ /^Device: ([^,]+), type changed from \'\w+\' to \'\w+\'/ )) {
       # ignore
   } elsif ( ($Device) = ($ThisLine =~ /^Device: ([^,]+), state (?:read from|written to)/ )) {
       # ignore
   } elsif ( $ThisLine =~ /^file \/var\/run\/smartd.pid written containing PID [0-9]+/ ) {
       # ignore
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^ *$/ )) {
       # ignore empty lines
   } elsif ( ($ThisLine =~ /^smartd version/)
      || ($ThisLine =~ /^smartd [0-9.]+ [0-9-]+ r[0-9]+ \[.*\]/)
      || ($ThisLine =~ /^Home page/)
      || ($ThisLine =~ /Copyright $C$ [0-9-]+(?: by|,) Bruce Allen/)
      || ($ThisLine =~ /configuration file/i)
      || ($ThisLine =~ /\[trip Temperature is \d+ Celsius\]/)
      || ($ThisLine =~ /^Monitoring/)
      || ($ThisLine =~ /smartd received signal 15: Terminated/)
      || ($ThisLine =~ /smartd is exiting $exit status 0$/)
      || ($ThisLine =~ /smartd has fork/)
      || ($ThisLine =~ /smartd (startup|shutdown) succeeded/)
      || ($ThisLine =~ /Unable to register device (.*) $no Directive -d removable$. Exiting/)
      || ($ThisLine =~ /Device (.*), SATA disks accessed via libata are not currently supported by smartmontools./)
      || ($ThisLine =~ /Device: (.*), IE $SMART$ not enabled, skip device/)
      || ($ThisLine =~ /^Try '.*' to turn on SMART features/)
      || ($ThisLine =~ /Device: (.*), Bad IEC (SMART) mode page, err=-5, skip device/)
      || ($ThisLine =~ /Drive: DEVICESCAN, implied '-a' Directive on line [\d]+ of file/)
      || ($ThisLine =~ /packet devices \[this device CD\/DVD\] not SMART capable/)
      || ($ThisLine =~ /System clock time adjusted to the past/) )
   {
       # ignore

} elsif ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), is SMART capable. Adding to "monitor" list./ )) {
      $Monitoring{$Device} = 1;
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), ([^,]+, S\/N:[^,]+,.* FW:.*)/ )) {
      $DeviceInfo{$Device} = $Msg;
   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), (\[[^,]+, lu id: .*)/ )) {
      $DeviceInfo{$Device} = $Msg;
#   } elsif ( ($Device,$Msg) = ($ThisLine =~ /^Device: ([^,]+), (.*)$/)) {
#      $ParamChanges{$Device}{$Msg}++;
   } elsif ( ($Device) = ($ThisLine =~ /^Device: ([^,]+), not found in smartd database./ )) {
      $NotInDatabase{$Device}++;
	 } elsif ( my ($Device,$AttribType,$Code,$Name,undef,undef,undef,$RawVal) = ($ThisLine =~ /^Device: ([^,]+), SMART ([A-Za-z]+) Attribute: ([0-9]+) (Temperature_Celsius) changed from ([0-9]+) (\[Raw [0-9]+(?: $[0-9]+\s[0-9]+\s[0-9]+\s[0-9]+(?:\s[0-9])?$)?\]) to ([0-9]+) \[Raw ([0-9]+)(?: $[0-9]+\s[0-9]+\s[0-9]+\s[0-9]+(?:\s[0-9])?$)?\]/)) {
      push @{$TempChanges{$Device}}, $RawVal;
   # smartd reports temperature changes this way only for SCSI disks
   } elsif ( my ($Device,$AttribType,$Code,$Name,undef,undef,$NewVal) = ($ThisLine =~ /^Device: ([^,]+), SMART ([A-Za-z]+) Attribute: ([0-9]+) ([A-Za-z_]+) changed from ([0-9]+) (\[Raw [0-9]+\] )?to ([0-9]+)/)) {
      push (@{$ParamChanges{$Device}{"$AttribType: $Name ($Code)"}}, $NewVal);
   } elsif ( my ($Device,$Name,undef,$NewVal) = ($ThisLine =~ /^Device: ([^,]+), (.*) increased from ([0-9]+) to ([0-9]+)/) ) {
      push (@{$ParamChanges{$Device}{"information: $Name"}}, $NewVal);
   } elsif ( my ($Device,$NewVal) = ($ThisLine =~ /^Device: ([^,]+), initial Temperature is (\d+) Celsius/)) {
      push @{$TempChanges{$Device}},$NewVal;
   } elsif ( my ($Device,$Limit) = ($ThisLine =~ /^Device: ([^,]+), Temperature \d+ Celsius reached limit of (\d+) Celsius/)) {
   # Device: /dev/sda, Temperature 37 Celsius reached limit of 10 Celsius (Min/Max 37/37)
      $TempLimit{"$Device,$Limit"}++;
   } elsif ( my ($Device,$Limit) = ($ThisLine =~ /^Device: ([^,]+), Temperature \d+ Celsius reached critical limit of (\d+) Celsius/)) {
   # Device: /dev/sda, Temperature 38 Celsius reached critical limit of 15 Celsius (Min/Max 38!/39)
      $TempCritLimit{"$Device,$Limit"}++;
   } elsif ( my ($Device,$NewVal) = ($ThisLine =~ /^Device: ([^,]+), Temperature changed [-+]?\d+ Celsius to (\d+) Celsius/)) {
      push @{$TempChanges{$Device}},$NewVal;
   } elsif ( my ($Device, $Num) = ($ThisLine =~ /^Device: ([^,]+), (\d+) Currently unreadable $pending$ sectors/) ) {
      $Pendsectors{$Device}++;
      $NumPendsectors{$Device} = $Num;
   } elsif ( my ($Device, $Num) = ($ThisLine =~ /^Device: ([^,]+), (\d+) Offline uncorrectable sectors/) ) {
      $Offsectors{$Device}++;
      $NumOffsectors{$Device} = $Num;
   } elsif ( my ($Device,$TestType) = ($ThisLine =~ /^Device: ([^,]+), starting scheduled ((?:Short|Long|Conveyance|Selective) Self-|Offline Immediate )Test/) ) {
      $DriveTest{$Device}{$TestType}++;
   } elsif ( my ($Device,$AttribType,$Code,$Name) = ($ThisLine =~ /^Device: ([^,]+), Failed SMART ([A-Za-z]+) Attribute: ([0-9]+) ([A-Za-z_]+)/)) {
      $Failed{$Device}{"$AttribType attribute: $Name ($Code)"}++;
   } elsif ( my ($Device, $Text) = ($ThisLine =~ /^Device: ([^,]+), failed (.*)$/) ) {
      $Failed{$Device}{"$Text"}++; 
   } elsif ( ( $ThisLine =~ /warning/i ) ) {
      $Warnings{$ThisLine}++;
   } elsif ( my ($Device, $Text) = ( $ThisLine =~ /^Device: ([^,]+), (can't monitor.*)$/i ) ) {
      $CantMonitor{$Device}{$Text}++;
   } elsif ( ($ThisLine =~ /smartd startup failed/ ) ) {
      $StartupFailed++;
   } elsif ( ($ThisLine =~ /smartd shutdown failed/ ) ) {
      $ShutdownFailed++;
   } elsif ( my ($Device,$DLine) = ($ThisLine =~ /Unable to register SCSI device (.*) at line ([0-9]*) of file/) ) {
      $UnableToReg{"$Device,$DLine"}++
   } elsif ( ($Device) = ($ThisLine =~ /Device ([^ ]+) not available/)) {
      $UnavailableDev{$Device}++;
   } elsif ( my ($Device) = ($ThisLine =~ /Device (.*): SATA disks accessed via libata are supported by Linux kernel versions 2.6.15-rc1 and above/) ) {
      $SataDisk{"$Device"}++;
   } elsif ($ThisLine =~ /Unable to monitor any SMART enabled devices\. Try debug $-d$ option\. Exiting/) {
      $UnableToMonitor++;
   } elsif ( my ($Device) = ($ThisLine =~ /Device: ([^,]+), FAILED SMART self-check/) ) {
      $CheckFailed{$Device}++;
   } else {
      # Report any unmatched entries...
      $OtherList{$ThisLine}++;
   }

}

if (keys %CheckFailed) {
   print "\nFAILED SMART self-check !!!";
   print "\n---------------------------";
   foreach my $Device (sort keys %CheckFailed) {
      printf "\n   %s: BACK UP DATA NOW!", $Device;
   }
   print "\n====================================\n";
}

if ($UnableToMonitor > 0) {
   print "\nUnable to monitor any SMART enabled devices.";
   print "\n    Try debug (-d) option:                    $UnableToMonitor Time(s)\n";
}

if (keys %NotInDatabase) {
   print "\n";
   foreach my $Device (sort keys %NotInDatabase) {
      print "$Device not in smartd database.\n";
   }

}

if (keys %CantMonitor) {
   foreach my $Device (sort keys %CantMonitor) {
      print "\n$Device :\n";
      foreach my $Line (sort keys %{$CantMonitor{$Device}}) {
         print "  $Line - " . $CantMonitor{$Device}{$Line} . " Time(s)\n";
      }
   }
}

if (keys %ParamChanges) {
   foreach my $Device (sort keys %ParamChanges) {
      print "\n$Device :\n";
      foreach my $Msg (sort keys %{$ParamChanges{$Device}}) {
         print "   $Msg changed to ";
         my $count=0;
         foreach (@{$ParamChanges{$Device}{$Msg}}) {
           # print 12 values to each line
           if ($count % 12 == 0) {
             print "\n     ";
           }
           print "$_, ";
           $count++;
         }
         print "\n";
      }
   }
}

if (keys %TempChanges) {
       print "Temperature Changes\n==================\n";
       my (@min,@max);
   foreach my $Device (sort keys %TempChanges) {
      if($Detail < 10) {
                       my @sorttemp = sort @{$TempChanges{$Device}};
                       push @min, $sorttemp[0];
                       push @max, $sorttemp[$#sorttemp];
      } elsif($Detail < 20) {
                       my @sorttemp = sort @{$TempChanges{$Device}};
                       print "$Device :  $sorttemp[0] - $sorttemp[$#sorttemp]\n";
               } else {
                       print "$Device : ";
                       print join ", ",@{$TempChanges{$Device}};
                       print "\n";
               }
   }
   if($Detail < 10) {
          my @sorttemp = sort @min;
               my $mint = $sorttemp[0];
          my @sorttemp = sort @max;
               my $maxt = $sorttemp[$#sorttemp];
          print "All devices: $mint - $maxt\n";
   }
}

if (keys %TempCritLimit) {
   printf "\nReached critical temperature limit:\n";
   foreach (keys %TempCritLimit) {
      my ($Device,$Limit)=split ",";
      print "\t" . $Device . ": reached limit of " . $Limit . " Celsius: ". $TempCritLimit{"$Device,$Limit"} .  " Time(s)\n";
   }
}

if (keys %TempLimit) {
   printf "\nReached temperature limit:\n";
   foreach (keys %TempLimit) {
      my ($Device,$Limit)=split ",";
      print "\t" . $Device . ": reached limit of " . $Limit . " Celsius: ". $TempLimit{"$Device,$Limit"} .  " Time(s)\n";
   }
}

if (keys %Pendsectors){
   print "\nCurrently unreadable (pending) sectors detected:\n";
   foreach my $Device (sort keys %Pendsectors) {
      print "\t" . $Device . " - " . $Pendsectors{$Device} . " Time(s)\n";
      print "\t" . $NumPendsectors{$Device} . " unreadable sectors detected\n";
   }

}

if (keys %Offsectors){
   print "\nOffline uncorrectable sectors detected:\n";
   foreach my $Device (sort keys %Offsectors) {
      print "\t" . $Device . " - " . $Offsectors{$Device} . " Time(s)\n";
      print "\t" . $NumOffsectors{$Device} . " offline uncorrectable sectors detected\n";
   }

}

if (keys %Failed) {
   foreach my $Device (sort keys %Failed) {
      print "\n$Device :\n";
      foreach my $Msg (sort keys %{$Failed{$Device}}) {
         print "   Failed $Msg " . $Failed{$Device}{$Msg} . " Time(s)\n";
      }
   }
}

if (keys %DriveTest) {
   foreach my $Device (sort keys %DriveTest) {
      print "\n$Device :\n";
      foreach my $Type (sort keys %{$DriveTest{$Device}}) {
         print "   started scheduled ${Type}Test " . $DriveTest{$Device}{$Type} . " Time(s)\n";
      }
   }
}

if ( (keys %Warnings) ) {
   print "\nWarnings:\n";
   foreach my $Line (sort {$Warnings{$b} <=> $Warnings{$a}} keys %Warnings) {
      print "\t" . $Line . " - ". $Warnings{$Line} . " Time(s)\n";
   }
}

if ($StartupFailed) {
   print "\n Smartd startup failed: " . $StartupFailed . " Time(s)\n";
}

if ($ShutdownFailed) {
   print "\n Smartd shutdown failed: " . $ShutdownFailed . " Time(s)\n";
}

if ( (keys %UnableToReg) ) {
   print "\n Wrong configuration for devices:\n";
   foreach (sort keys %UnableToReg) {
      ($Device,$DLine) = split ",";
      print "   " . $Device . (" (line ") . $DLine . ") : ". $UnableToReg{"$Device,$DLine"} . " Time(s)\n";
   }
}

if (%UnavailableDev) {
   print "\nUnavailable device:\n";
   foreach my $Device (sort keys %UnavailableDev) {
      print "   Device " . $Device . " : " . $UnavailableDev{$Device} . " Time(s)\n";
   }
}

if (%SataDisk) {
   print "\nSATA disk(s) supported by Linux kernel >= 2.6.15-rc1:\n";
   foreach my $Device (sort keys %SataDisk) {
      print "  " .$Device .": Try adding '-d ata' or '-d sat' to the smartd.conf config file line\n";
   }
   print "\n";
}

if (keys %Monitoring and $Detail > 7) {
   print "\nMonitoring:\n";
   foreach my $Device (sort keys %Monitoring) {
      print "\t$Device";
      if (defined($DeviceInfo{$Device})) {
         print ": $DeviceInfo{$Device}\n";
      } else {
         print "\n";
      }
   }
}

if ((%OtherList) and (not $IgnoreUnmatched)){
   print "\n**Unmatched Entries**\n";
   foreach my $line (sort keys %OtherList) {
      print $line." : " .$OtherList{$line}." time(s)\n";
   }
}

exit(0);

# vi: shiftwidth=3 tabstop=3 syntax=perl et
# Local Variables:
# mode: perl
# perl-indent-level: 3
# indent-tabs-mode: nil
# End:

/var/run/././../usr/share/logwatch/scripts/services/smartd